Datakom D-300 MK2 User Manual

D-300 MK2 User Manual Firmware V-6.3
L052D01-EN - 2 -
Any unauthorized use or copying of the contents or any part of this document is prohibited.
This applies in particular to trademarks, model denominations, part numbers and drawings.
This document describes minimum requirements and necessary steps for the successful installation of
the D-300 family units.
Follow carefully advices given in the document. These are often good practices for the installation of
genset control units which reduce future issues.
For all technical queries please contact Datakom at below e-mail address:
technical.support@datakom.com.tr
If additional information to this manual is required, please contact the manufacturer directly at below e-
mail address:
technical.support@datakom.com.tr
Please provide following information in order to get answers to any question:
- Device model name (see the back panel of the unit),
- Complete serial number (see the back panel of the unit),
- Firmware version (read from the display screen),
- Measuring-circuit voltage and power supply voltage,
- Precise description of the query.
FILENAME
DESCRIPTION
500-Rainbow Installation
Rainbow Plus Installation Guide
500-Rainbow Usage
Rainbow Plus Usage Guide
500-GSM Configuration
GSM Configuration Guide for D-series
300-Firmware Update
Firmware Update Guide for D-200 D-300 and D-500-LITE
500-MODBUS
Modbus Application Manual for D-series
500-Rainbow Scada Usage
Rainbow Scada Usage Guide
QUERRIES
RELATED DOCUMENTS
ABOUT THIS DOCUMENT
COPYRIGHT NOTICE

Datakom D-300 MK2 Specifications

General

Brand	Datakom
Model	D-300 MK2
Category	Controller
Language	English