DRAGON™ DX31/MX31
4
2.2 OM-30X0 INTERFACE CABLE CONNECTIONS
OM-30X0 Connectors
The OM-30X0 incorporates a multi-standard interface, which can be connected to a
Host by simply plugging the correct interface cable into the Host connector, placed on
the base of the cradle. In addition the cradle must be connected to an external power
supply.
Disconnecting the OM-30X0 Cable
To disconnect the cable, insert a paper clip or other similar object into the hole
corresponding to the Host connector on the body of the cradle.
Push down on the clip while unplugging the cable.
Interface Cable
Power
To Next Page
Loading...
