Need help?Do you have a question about the Datalogic DX8210 and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Maximum reading area | Not available |
| Depth of Field | 100-300 mm |
| Supported Barcodes | Code 39, Code 128 |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Drop Specification | 1.5 m |
| Current Consumption | Not available |
| Interface | RS-232 |
Overview of the DX8210 omnidirectional barcode scanner's features and applications.
Steps to prepare for mounting components, including reading instructions and reviewing drawings.
Outlines the order of mechanical and electrical installation steps for the system.
Details on how to install the DX8210 using different bracket options.
Steps for preparing electrical installation, including safety and requirements review.
Sequence for installing a DX8210 barcode scanner, including connections.
General precautions for electrical installation, including clearances and wiring.
Introduction to e-Genius, a browser-based configuration and monitoring application.
Instructions on how to access and start the e-Genius application.
How to select and configure operating modes like On Line, Continuous, and PackTrack.
Procedure to select and configure barcodes to be read in an application.
Window to calibrate the scanner using methods like Built-In or PackTrack.
Details the initial power-up sequence and self-diagnostic tests of the scanner.
Procedure to perform a quick check of DX8210 operation using a test barcode.
Steps for physically installing scanners, CBX510, and accessories.
Steps for installing scanners and the SC5000 controller for system setup.
Guides through calibrating scanners for the PackTrack operating mode.
Procedure to verify the accuracy of PackTrack calibration settings.
Procedures for replacing a failed scanner with a spare unit.
Outlines maintenance tasks performed on an "as needed" basis for proper scanner operation.
Steps to verify scanner operation after maintenance.
Confirms photoelectric sensor alignment and LED indicators.
Explains the meaning of LED status lights for diagnosing failures.
Lists error codes, explanations, symptoms, troubleshooting, and required actions.
Detailed specifications for DX8210 Omnidirectional Barcode Scanning Systems.
To Next Page