User Interface
184
DX8210 Barcode Scanner
Utilities | Update Firmware
Use Update Firmware to reload the scanner system firmware.
To Extract Image:
1. In the menu under Utili
ties, click Update Firmware. The Update Firmware
window opens.
2. Click Extract Image. A confirmation box appears.
3. Click OK to continue
4. The graphic on screen indicates Extract Image
is in-process. A message will
appear when Extract Image is complete.
Depending upon the computer settings of the device interfacing with the scan-
ner, you may be prompted to save the image to a lo
cation, or it may automati-
cally save it to the PC's download folder.
This function should only be performed under the guidance of Datalogic Technical Support.
To Next Page
Loading...
