Datalogic Dragon D131 - 5.11 Configuration Editing Commands

REFERENCES
163
5.11 CONFIGURATION EDITING COMMANDS
The following commands carry out their specific function and then exit the
configuration environment.
Command Description
Ì$+$*oÎ
Restore Dragon™ reader default configuration
(see the relative Quick Reference Manual for
default settings)
Ì$+$!KÎ
Transmit the Dragon™ D131 or
Dragon™ M131 software release
Ì$+$&_Î
Transmit Dragon™ reader configuration in
ASCII format.
This command is not effective with Pen
emulation interface.
Ì$+RX0$-qÎ
Restore OM-30X0 default configuration (see the
relative Quick Reference Manual for default
settings)
Ì$+RX1$-vÎ
Transmit the OM-30X0 Software release.
Ì$+RX2$-{Î
Transmit OM-30X0 configuration in ASCII
format.
This command is not effective with Pen
emulation interface.