DRAGON™ D131/M131
28
Set Radio Address
5.
ÌRA0RFHÎ
+
four digits for the Dragon™ M131 Address (from 0000 to 1999).
All readers used in the same area must have different addresses.
Exit and Save Configuration
6.
Ì$-?Î
7.
Read the Bind code to pair the Dragon™ M131 to the OM-30X0 cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following paragraph
4.5.1, ‘Using Multiple M Series Readers with Same Cradle'.
Bind
Ì$+RN0$-IÎ
The green LED on the Dragon™ M131 will blink; the reader is ready to be
inserted into the cradle.
8.
Firmly insert the reader into the OM-30X0 cradle within 10 seconds, a beep will
be emitted, signaling that the OM-30X0 cradle has been paired to the
Dragon™ M131, and the green LED on the reader will go off.
green LED
To Next Page
Loading...
