Datalogic falcon x3+ - Connection to USB Peripherals

CONNECTIONS
21
3
3.2 CONNECTION TO USB PERIPHERALS
To connect the Falcon X3+ to a USB keyboard or a memory device, connect the
terminal to the Datalogic 94A051969 cable or to the Datalogic 94A051971 cable
(together with a standard A to micro A USB cable).
For all these devices maximum current withdrawal must be below 100mA.
Key:
A Keyboard with USB interface C 94A051969 Micro USB Host Cable/
94A051971 Handylink Micro USB Host
Cable
B Falcon X3+ D Standard A to Micro A USB Cable
Key:
A USB hard drive/ external
memory source
C 94A051971 Handylink Micro USB Host
Cable
B Falcon X3+ D Standard A to Micro A USB Cable
A
B
C
D
A
B
C
D