Datalogic falcon x3+ - Application Switcher

1 FALCON™ X3+
62
4
4.6.4 Application Switcher
The application switcher provides the same functionality as the standard Windows®
Alt+Tab function. This allows the user to switch between the various open
applications.
The application switcher can be activated via an assigned shortcut key specified in
the DL Buttons tab (see par. 4.6.2.) When the assigned button is pressed, the dialog
shown below will be displayed:
Press the assigned button to cycle through the running applications when the dialog
is open. Press <Enter> to switch to the selected application or <Esc> to close the
application switcher.