Datalogic falcon x3+ - RS232 Connection

CONNECTIONS
23
3
3.3 RS232 CONNECTION
You can use the Datalogic 94A051972 cable to directly connect the Falcon X3+ to a
host computer to transfer data through the RS232 interface.
Key:
A Host computer C Falcon X3+
B 94A051972 Handylink Micro RS232
Client Cable
The Single Slot Dock can be connected to the Host by means of a standard null
modem cable such as Datalogic 94A051020 CAB-427 for 9-pin connections.
Once the Host has been turned on, insert the Falcon X3+ into the dock.
Key:
A Host Computer C 94A150057 Falcon X3+ Single
Slot Dock
B 94A051020 CAB-427 RS232
Null Modem Cable
D 94ACC1381 Power Adapter
A
B
C
A
B
C
D