Datalogic falcon x3+ - Bluetooth Manager Device Setup

USE AND FUNCTIONING
77
4
4.7.2 Bluetooth
®
Manager Device Setup
Using the Falcon X3+ to connect to another device
To create a Bluetooth® pairing between your device and another device that has
Bluetooth® capabilities, ensure that the two devices are turned on, discoverable, and
within close range.
1. From the Bluetooth Manager control panel tap ‘Connections’.
2. Search for available Bluetooth® devices by tapping the button for the type of
device you want (Printer, Serial or All) or tap Discovery > Discover to skip this
step. The Falcon X3+ will search for Bluetooth® devices within range.
If you attempt to set up a connection when the Bluetooth® radio is
disabled, you will receive a message reminding you that the radio is
turned off, and asking if you want to turn it on. Tap Yes if you need to
enable the Bluetooth® radio.
NOTE