Datalogic falcon x3+ - LASER DATA CAPTURE

1 FALCON™ X3+
34
4
4.3.1 Laser Data Capture
To scan barcodes, point the Falcon X3+ laser model onto the code from a distance
within the reading range while pressing the SCAN key or the pistol trigger.
The lighted band emitted by the laser must completely cross the barcode as shown in
the figure below.
If the scan has taken place correctly:
− the Good Read LED glows steadily Green for a configurable time;
− if enabled, the
Good Read Beep plays;
− if enabled, the GreenSpot projects a green spot onto the bar code image.