CONNECTIONS
802.11 a/b/g/n radio module is on by default, in order to avoid
wasting energy, you can switch it off using the Wireless
Communications applet.
NOTE
Suspending the terminal powers off the 802.11 a/b/g/n radio and
drops the radio connection. When the terminal resumes, depending
on the radio power mode and security protocol selected, it may take
up to 30 seconds for the 802.11 a/b/g/n radio driver to re-associate
the radio to the network.
NOTE
Area coverage and radio performance may vary, due to
environmental conditions, access point types or interference caused
by other devices (microwave ovens, radio transmitters, etc.).
NOTE
In case of heavy usage the Falcon X3+ may get warm; this is normal
and does not mean a malfunction.
NOTE
To Next Page
Loading...
