FEATURES FOR STAR MODELS ONLY ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
261
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from base station to reader — signals a good transmission as soon as the Base
Station receives a label
• ACK when sent to host — reader signals a good transmission as soon as the Base
Station has sent the label to the host
• ACK from host — reader signals a good transmission as soon as the Base Station
has sent the label to the host and host has replied with an acknowledge message.
$CSTTX00
STAR Radio Transmit Mode =
ACK from Base Station
STAR Radio Transmit Mode = ACK When Sent to Host
$CSTTX01
$CSTTX02
STAR Radio Transmit Mode = ACK from Host
NOTE: ACK from host works only for RS-232 or USB-COM interfaces with
ACK/NACK disabled. If ACK from host is configured with any other interface
conditions, it works like ACK when sent to host.
See “Message Formatting” on page 295. for details.
NOTE: The Base Station can receive a host message only if Host Commands
Obey/Ignore (
page 35) is set to Ignore.
To Next Page
Loading...
Need help?
General
