DATALOGIC
12
UK/US
TECHNICAL FEATURES
Electrical Features
Battery Type 2 AA NiMh* batteries
1.2 V – 1850 mAh
Time of recharge NiMh 4 hours
Operating autonomy
(typ. continuous reading)
25.000 reads - NiMh
Max scan rate 270 scans/sec
Indicators LED, Good Read Spot, Beeper
Optical Features
Sensor CCD solid state (3648 pixels)
Illuminator LED array
Wavelength 630 ~ 670 nm
Max. LED Output Power 0.33 mW
LED Safety Class Class 1 EN 60825-1
Reading field see reading diagram (p.47)
Max. resolution 0.076 mm, 3 mils
PCS minimum 15% (Datalogic Test Chart)
Radio Features
Bluetooth
®
version
Bluetooth
®
1.1
Profiles supported Serial Port Profile
Working frequency 2.4000 to 2.4835 GHz
Maximum output power 2.5 mW (class 2)
Range (in open air) 10 m.
Environmental Features
Working Temperature 0°to + 40 °C / 32° to 104 °F
Storage Temperature
(without battery)
-20°to + 70 °C / - 4° to 158 °F
Humidity 90% non condensing
Drop resistance IEC 68-2-32 Test ED
Protection class IP30
Mechanical Features
Weight (with batteries) about 280 g. / 9.87 oz
Dimensions 179 x 81 x 98 mm / 7.04 x 3.18 x 3.85 in
Material ABS and Polycarbonate molded with rubber
* It is possible to employ also NiCd or non-chargeable Alkaline AA batteries.
To Next Page
Loading...
