Datalogic GRYPHON BT100 User Manual

DATALOGIC
10
UK/US
ADVANCED FORMATTING PARAMETERS
concatenation disabled, no advanced formats defined, Zebra printer
formatting = disabled.
RADIO PARAMETERS
radio protocol timeout = 3 seconds, transmission retry = none, no
ACK/NACK protocol nor frame packing, power-off timeout = 4 hours, user-
friendly name = "Gryphon BTx00 ", beeper control for radio response =
good decode and good reception, Bluetooth
®
role = Slave, destination
address = 000000000000, auto-connection = enabled, auto-reconnection =
enabled.

Datalogic GRYPHON BT100 Specifications

General

Scan speed	270 sec/page
Sensor type	CCD
Tilt angle range	-35 - 35 °
Decoding standards	1D/Linear Codes:\\tAutodiscriminates all standard 1D codes including GS1 Databar linear codes; Stacked Codes: Code 16K; Code 49; GS1 DataBar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar Stacked Omnidirectional;
Dimensions (WxDxH)	208 x 107 x 56 mm
Standard interfaces	RS-232
Product color	Gray
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Weight	280 g