Datalogic Gryphon GBT4400 - Using the Gryphon I GBT4400

Using the Gryphon™ I GBT4400
Quick Reference Guide 19
Using the Gryphon™ I GBT4400
The Gryphon™ I GBT4400 normally functions by capturing and
decoding codes. The reader is equipped with an internal Moti-
onix™ motion-sensing function which activates the aiming
system on device motion. The intelligent aiming system indi-
cates the field of view which should be positioned over the bar
code:
Aiming System
Relative Size and Location of Aiming System Pattern
A red beam illuminates the label. The field of view indicated by
the aiming system will be smaller when the reader is closer to
the bar code and larger when it is farther from the code. Sym-
bologies with smaller bars or elements (mil size) should be
read closer to the unit. Symbologies with larger bars or ele-
ments (mil size) should be read farther from the unit.
If the aiming system is centered and the entire bar code is
within the aiming field, you will get a good read. Successful
reading is signaled by an audible tone plus a good-read green
spot LED indicator.
Reference the Gryphon I GBT4400 Product Reference Guide
(PRG) or Datalogic Aladdin configuration software (both avail-
able on the Datalogic website) for more information about
this feature and other programmable settings.
Linear bar code
2D Matrix symbol