Reading Parameters
Quick Reference Guide 9
Operating Modes
The reader can operate in one of several scanning modes.
On Line —
Scanning is activated when the button is pushed or
through an external trigger (GFS4450-9 only).
Serial On Line —
Scanning is initiated by command sent through the
host interface (manual and external triggering can be enabled in this
read mode through option setting).
Automatic —
Scanning is continually on.
Automatic (Object Sense) —
Scanning is turned on automatically when
an item is placed in reader’s field of view.
Operating Mode = On Line
See the PRG for further information on the operation of
reading modes, and additional programmable fea-
tures.
ENTER/EXIT PROGRAMMING MODE
To Next Page
Loading...
