Indicators
Quick Reference Guide 19
Indicators
The reader’s beeper sounds and its LED illuminates to indicate vari-
ous functions or errors on the reader. An optional “Green Spot” also
performs useful functions. The following tables list these indica-
tions. One exception to the behaviors listed in the tables is that the
reader’s functions are programmable, and so may or may not be
turned on. For example, certain indications such as the power-up
beep can be disabled using programming bar code labels.
Indicator Description LED Beeper
Power-up
Beep
The reader is in
the process of
powering-up.
Reader beeps
four times at
highest fre-
quency and
volume upon
power-up.
Good Read
Beep
A label has
been success-
fully scanned
by the reader.
LED behavior
for this indica-
tion is config-
urable via the
feature “Good
Read: When to
Indicate”
(see the PRG
for informa-
tion.)
The reader will
beep once at
current fre-
quency, vol-
ume,
mono/bi-tona
l setting and
duration upon
a successful
label scan.
To Next Page
Loading...
