Datalogic JoYa A6 Touch - Add a Wi-Fi Network

Settings
56 JOYA™ TOUCH A6
Add a Wi-Fi Network
1. Tap Settings > Wi-Fi and verify that the Wi-Fi is turned on.
2. Tap Add network at the end of the available network list:
3. Enter the Network SSID (Wi-Fi network name). For secure Wi-Fi
network connections, tap None under Security, and then select
the type of security protocol required from the pop-up menu (e.g.,
WEP, WPA/WPA2 PSK or 802.1xEAP). Enter any additional
security information required by the type of security protocol
selected.