User’s Manual 145
Data Capture
The Joya Touch A6 has an integrated imager that collects data by
scanning barcodes.
See Scanner Settings on page 66 for instructions on configuring the
scanner settings.
Imager Data Capture
The imager uses digital camera technology to take a digital picture
of a barcode, the image is stored in memory and software decoding
algorithms are executed to extract the data from the image. The
omni-directional scanning does not require that the operator orient
the barcode to align with the scan pattern.
To scan a barcode symbol:
1. Point the scan window at the barcode from a distance within the
reading range.
2. Press the Scan Key or the Scan Trigger. The imager projects a
laser aiming pattern similar to those used on cameras. The
aiming pattern is used to position the barcode or object within
the field of view.
To Next Page
Loading...
Need help?
General