Battery
18 JOYA™ TOUCH A6
Charge with the Single Slot Dock Locking
To prevent the risk of short-circuiting, first plug the power cord into
the power connector on the back of the dock, then connect the power
cord to the power supply.
CAUTION
Use only the Datalogic power supply 91ACC0048 to power
the Joya Touch Single Slot Dock Locking.
The Single Slot Dock Locking cannot be daisy-chained to a
Joya Touch 3-Slot Cradle.
NOTE
Insert the device into the dock with the screen facing front
and the head facing down.
NOTE
The Single Slot Dock Locking can be unlocked using the
unlock key provided with the cradle or by software sending
an unlock command from the inserted device. See the
Single Slot Dock Locking Quick Start Guide for further
details.
To Next Page
Loading...
Need help?
General