Datalogic MAGELLAN 1400I - Code 128 Length 1, Length 2 Programming Instructions; Code 128 Conversion to Code 39

Symbologies
5-38 Magellan
®
1400i
Code 128 and UCC/EAN 128 — continued
Code 128 Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Appendix C, Alpha-Numeric Pad and scan the three digits (zero padded) represent-
ing the length in decimal notation.
4. Scan the END bar code.
Code 128 Conversion to Code 39
Enables/disables expansion of Code 128 labels to Code 39.
NOTE
For Code 128 bar codes, only the data charac-
ters are included in the length calculations.
START / END
PROGRAMMING BAR CODES
DEFAULT SETTING FOR THIS FEATURE: 001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 080
START / END
PROGRAMMING BAR CODES
Disable
DEFAULT
Enable