Datalogic MAGELLAN 1400I - Standard 2 of 5; Disable;Enable Standard 2 of 5; Check Digit Verification

Standard 2 of 5
Product Reference Guide 5-63
Standard 2 of 5
The following options apply to the Standard 2 of 5 symbology.
Disable/Enable Standard 2 of 5
When this feature is disabled, the scanner will not read Standard 2 of 5 bar codes.
Check Digit Verification
When enabled, the scanner will verify the check digit of the labels.
START / END
PROGRAMMING BAR CODES
Disable Std 2 of 5
DEFAULT
Enable Std 2 of 5
START / END
PROGRAMMING BAR CODES
Disable Check Digit Verification
DEFAULT
Enable Check Digit Verification