Datalogic MAGELLAN 1400I - Standard 2 of 5 Length 1, Length 2 Programming Instructions

Symbologies
5-66 Magellan
®
1400i
Standard 2 of 5 — continued
Standard 2 of 5 Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Appendix C, Alpha-Numeric Pad and scan the three digits (zero padded) represent-
ing the length in decimal notation.
4. Scan the END bar code.
NOTE
For Standard 2 of 5 bar codes, all check and
data characters are included in the length calcu-
lations.
START / END
PROGRAMMING BAR CODES
DEFAULT SETTING FOR THIS FEATURE: 008
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 050