Micro PDF417
Product Reference Guide
5-73
Micro PDF417 — continued
Micro PDF 128 Emulation
Specifies which Label I.D. to use for Micro PDF labels when Code 128 or EAN128 emulation
is active.
•If
Micro PDF 128 Emulation is disabled, and AIM ID is enabled, and the scanner is perform-
ing EAN128 or Code 128 emulation; the MicroPDF AIM I.D. type is used (]L3, ]L4 or
]L5).
•If
Micro PDF 128 Emulation is disabled, and the scanner is performing EAN128 or Code
128 emulation; the scanned label type is recognized as MicroPDF.
•If
Micro PDF 128 Emulation is enabled, and AIM ID is enabled, and the scanner is perform-
ing EAN128 or Code 128 emulation; the Code 128 / EAN 128 AIM I.D. type is used
(]C0, ]C1 or ]C2).
•If
Micro PDF 128 Emulation is enabled, and the scanner is performing EAN128 or Code
128 emulation; the label type is changed to either EAN128 or Code 128.
START / END
PROGRAMMING BAR CODES
Disable Micro PDF 128 Emulation
DEFAULT
Enable Micro PDF 128 Emulation
To Next Page
Loading...
