Datalogic MAGELLAN 1400I - Wand Idle State

Interface
Features
Product Reference Guide 3-27
Wand Emulation — cont.
Bar/Space Polarity
Low/High — Black will be transmitted as a low voltage level (0 to +0.7V) and space as high
level (+2.4 to +5.25V).
High/Low — Black will be transmitted as a high voltage level (+2.4 to +5.25V) and space as
low level (0 to +0.7V).
Wand Idle State
This feature specifies the level of the wand output signal when idle. TTL logic levels:
High voltage level (+2.4 to +5.25V)
Low voltage level (0 to +0.7V).
START / END
PROGRAMMING BAR CODES
Bar/Space = Low/High
Bar/Space = High/Low
DEFAULT
START / END
PROGRAMMING BAR CODES
Wand Idle State = Low
DEFAULT
Wand Idle State = High