What to do if Datalogic Barcode Reader reads poorly?
If your Datalogic Barcode Reader isn't reading barcodes well, ensure the barcodes are high quality and free from wrinkles, smudges or tears. Try scanning known-good labels of a supported symbology to test the scanner's functionality. Also, make sure the scanner window is clean.
General| Type | Fixed bar code reader |
|---|---|
| Sensor type | LED |
| Scanner type | 2D |
| Yaw reading angle | -75 - 75 ° |
| Scanner resolution | 0.13 mm |
| Tilt reading angle | 0 - 360 ° |
| Pitch reading angle | -65 - 65 ° |
| Light levels (direct sunlight) | 0 - 86.1 lx |
| Linear (1D) barcodes supported | - |
| Optical sensor resolution (W x H) | 1280 x 800 pixels |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, MaxiCode, QR Code |
| Input voltage | 5 V |
| Power consumption | 500 mA |
| Power source type | USB |
| Buzzer | Yes |
| Certification | EN62471, IEC62471 |
| Product color | Black |
| Housing material | Plastic |
| Image formats supported | BMP, JPEG |
| International Protection (IP) code | IP52 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| USB version | 2.0 |
| Connectivity technology | Wired |
| Sustainability certificates | RoHS |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 75 mm |
|---|---|
| Width | 60 mm |
| Height | 150 mm |
| Weight | 240 g |
To Next Page
