Datalogic Magellan 2300HS Product Reference Guide

Other UPC/EAN Options
Product Reference Guide 5-169
UPC-A and EAN-13 Decoding Levels
Decoding levels allow the decoder to be set to perform at one of four
selectable levels:
• Very Conservative — Slower scan time, virtually eleminates mis-
reads. The most secure setting.
• Slightly More Aggressive — Faster scanning, more aggressive, yet
minimizes misreads.
• Moderately Aggressive — Even faster scanning, even more aggres-
sive.
• Very Aggressive — Fastest scan speed, most aggressive.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option on the following
pages. You’ll need to cover any unused bar codes on facing pages to
ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CAUTION
Use caution when setting this feature, as the aggressive settings for
this feature allow a higher potential for misreads.
NOTE
It is important to note that the default for this feature is the “Slightly
More Aggressive” setting. For default settings for other features, see
Appendix E.

Datalogic Magellan 2300HS Specifications

General

Scanner type	1D
Decoding standards	GS1 DataBar
Input voltage	90 - 265 V
Power requirements	47-63 Hz
Power consumption (standby)	2.5 W
Dimensions (WxDxH)	152 x 152 x 86 mm
Certification	RoHS
Product color	Gray
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	1100 g