HOST MODE PROGRAMMING
26
4
PARAMETER TYPE SEL STRING DATA
Output 1 External
Lighting Mode #n
1 1 ESC E #n 0 = Disabled
1 = Always On
2 = Triggered
Output 2 External
Lighting Mode #n
1 1 ESC F #n 0 = Disabled
1 = Always On
2 = Triggered
Image Filter #n 1 1 ESC l #n 0 = None
1 = Erode
2 = Dilate
3 = Open
4 = Close
Image Filter
Reiterations #n
0 ESC m #n Range: 1 to 5
NOTE
Special characters <FE
H
> and <FD
H
> must be added after #n in the
programming string to indicate parameter Depth > 9. Refer to paragraph 3.2
for further details.
To Next Page
Loading...
Need help?
General
