Datalogic Matrix 210 Programming Manual

HOST MODE PROGRAMMING
4
2
DESCRIPTION HOST COMMAND REPLY MESSAGE
4 Button Function 4
<ESC> 3 <ESC>
I C #
<ESC> K <CR><LF> <ESC> W
1 <CR><LF>
After entering this command during the programming session, the reader starts the
function associated with the F4 button position. Entering the same command again
will cause the reader to exit from the procedure.
If the programming command is correct, the device confirms with the first reply
message. If programming command is wrong (i.e. a typing error in the programming
string) or due to a transmission error, Matrix replies with the second error message.
2.5 OTHER FUNCTIONS
DESCRIPTION HOST COMMAND REPLY MESSAGE
1 Disable All Symbologies
<ESC> 4 <ESC>
I C #
<ESC> K <CR><LF>
<ESC> W 1 <CR><LF>
After entering this command during the programming session, the reader disables
all the symbologies in permanent memory.
If the programming command is correct, the device confirms with the first reply
message. If programming command is wrong (i.e. a typing error in the programming
string) or due to a transmission error, Matrix replies with the second error message.
2 Restore Default
<ESC> 5 <ESC>
I C #
<ESC> K <CR><LF> <ESC> W
1 <CR><LF>
After entering this command during the programming session, the reader restores the
factory default parameters in permanent memory.
If the programming command is correct, the device confirms with the first reply
message. If programming command is wrong (i.e. a typing error in the programming
string) or due to a transmission error, Matrix replies with the second error message.

Datalogic Matrix 210 Specifications

General

Brand	Datalogic
Model	Matrix 210
Category	Barcode Reader
Language	English