CONFIGURATION USING CODE SYMBOLS
Flash OFF 2 sec
Beeper Tone Tone 1
Beeper Volume High volume
Beeper Duration 50 ms
Reads per Cycle One read per cycle
Scan Timeout 5 sec
User Defined Beeper Tone Tone 1
User Defined Beeper Volume High Volume
User Defined Beeper Duration 100 ms
Codes per Scan One code per scan
Central Code Transmission Disabled
Reading Parameters (continued)
Order by Code Length Disabled
Order by Code Symbology Disabled
Autoscan Mode Disabled
Autoscan Aiming System Enabled
Autoscan Hardware Trigger Enabled
Autoscan Illumination System Disabled
Safety Time 500 ms (if Autoscan mode or Software
trigger type is selected and the Multiple
Reads per Cycle option is enabled.
Image Formatting
Image Preset 1, 2, 3, 4
Image Format JPEG format
Resolution Full (1280 x 1024)
Set JPEG Quality Factor 50
Brightness 0%
Contrast 0%
Color Depth 256 gray levels
23
To Next Page
Loading...
Need help?
General
