Programming Guide 49
Symbology Selection
The bar code programming labels on the following pages allow you to enable or
disable individual symbologies.
NOTE
If you enable a symbology that has additional features that should
be set, turn to the pages that support that symbology and its
programmable features.
SET ----------------------------------------------
ENABLE UPC/EAN --------------
DISABLE UPC/EAN --------------
ENABLE CODE 39------------------
DISABLE CODE 39 -----------------
ENABLE PHARMACODE
2
39 -------
DISABLE PHARMACODE 39 --------
2 Code 39 must first be enabled for the scanner to read PharmaCode 39 labels. Enabling PharmaCode
39 will convert Code 39 data to PharmaCode format whenever possible.
To Next Page
Loading...
