Datalogic QUICKSCAN 6000 PLUS - UPC;EAN Expansion

Programming Guide 53
UPC/EAN Expansion
Use these labels to enable or disable:
• Expand UPC-A to EAN-13 • Expand EAN-8 to EAN-13
• Expand UPC-E to UPC-A • Expand UPC-E to EAN-13
SET ----------------------------------------------
EXPAND
1
-------------------------------------------------
DON'T EXPAND ---------------------
EXPAND
1
----------------------------
DON'T EXPAND ---------------------
EXPAND
1
----------------------------
DON'T EXPAND ---------------------
EXPAND
1
-------------------------------------------------
DON'T EXPAND ---------------------
END ----------------------------------------------
1 When any expansion feature is enabled, the transmission of the Prefix, Suffix, Check Digit
and Number System Digit (NSD) are controlled by your selections for the symbology
'expanded to' rather than the symbology 'expanded from'. For example, if you expand UPC-E
to UPC-A, settings for UPC-A determine how the scanner sends a bar code's contents.
UPC-E TO UPC-A
E
XPANSION
EAN-8 TO EAN-13
E
XPANSION
UPC-A TO EAN-13
E
XPANSION
UPC-E TO EAN-13
E
XPANSION