Datalogic QuickScan QM2430-BK-433K1 - Upc-A; UPC-A Enable;Disable; UPC-A Check Character Transmission

Enter/Exit Programming Mode Code EAN/UPC
90 QuickScan™ I QD24XX/QBT24XX/QM24XX
UPC-A
The following options apply to the UPC-A symbology.
UPC-A Enable/Disable
When disabled, the reader will not read UPC-A bar codes.
$CABEN00(CR)
UPC-A = Disable
$CABEN01(CR)
UPC-A = Enable
DEFAULT
UPC-A Check Character Transmission
Enable this option to transmit the check character along with UPC-A bar code data.
$CABCT00(CR)
UPC-A Check Character Transmission = Don’t Send
$CABCT01(CR)
UPC-A Check Character Transmission = Send
DEFAULT