Datalogic QuickScan QM2430-BK-433K1 - Data Bits; Stop Bits

RS-232 Interface Enter/Exit Programming Mode
Product Reference Guide 29
Data Bits
This parameter allows the reader to interface with devices requiring a 7-bit or 8-bit ASCII pro-
tocol for sending and receiving data.
$CR2DA00(CR)
7 Data Bits
$CR2DA01(CR)
8 Data Bits
DEFAULT
Stop Bits
Set the number of stop bits to match host device requirements. See page 232 for more infor-
mation on this feature.
DEFAULT
$CR2ST00(CR)
1 Stop Bit
$CR2ST01(CR)
2 Stop Bits