Datalogic QuickScan QM2430-BK-433K1 User Manual

Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 191
Maxicode
Maxicode Enable / Disable
Enables/disables ability of reader to decode Maxicode labels.
DEFAULT
$CMXEN00(CR)
Maxicode = Disable
$CMXEN01(CR)
Maxicode = Enable
Maxicode Primary Message Transmission
Enables/disables the transmission of only the Primary Message when the Secondary Message is not readable.
DEFAULT
$CMXPT00(CR)
Maxicode Primary Message Transmission = Disable
$CMXPT01(CR)
Maxicode Primary Message Transmission = Enable

Datalogic QuickScan QM2430-BK-433K1 Specifications

General

Brand	Datalogic
Model	QuickScan QM2430-BK-433K1
Category	Barcode Reader
Language	English