Datalogic QuickScan QM2430-BK-433K1 - Disable All Symbologies

Enter/Exit Programming Mode Disable All Symbologies
88 QuickScan™ I QD24XX/QBT24XX/QM24XX
4. Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING bar
code to exit Programming Mode.
DISABLE ALL SYMBOLOGIES
Use this feature to disable all symbologies.
1. Scan the ENTER/EXIT PROGRAMMING Mode bar code.
2. Scan the Disable All Symbologies bar code.
3. Complete the programming sequen
ce by scanning the ENTER/EXIT PROGRAMMING bar
code.
$AD(CR)
Disable All Symbologies
This does not disable the reading of programming labels.