Datalogic QuickScan QM2430-BK-433K1 - Symbology Selection; Aztec Code; Aztec Code Enable; Disable; Aztec Code Length Control

Enter/Exit Programming Mode
182 QuickScan™ I QD24XX/QBT24XX/QM24XX
SYMBOLOGY SELECTION
Aztec Code
Aztec Code Enable / Disable
Enables/disables the ability of the reader to decode Aztec Code labels.
DEFAULT
$CAZEN00(CR)
Aztec Code = Disable
$CAZEN01(CR)
Aztec Code = Enable
Aztec Code Length Control
This feature specifies either variable length decoding or fixed length decoding for this symbol-
ogy.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
$CAZLC00(CR)
Aztec Code Length Control = Variable Length
$CAZLC01(CR)
Aztec Code Length Control = Fixed Length