Datalogic QuickScan QM2430-BK-433K1 - Codabar; Codabar Enable;Disable; Codabar Check Character Calculation

Enter/Exit Programming Mode Codabar
144 QuickScan™ I QD24XX/QBT24XX/QM24XX
CODABAR
The following options apply to the Codabar symbology.
Codabar Enable/Disable
When disabled, the reader will not read Codabar bar codes.
DEFAULT
$CCBEN00(CR)
Codabar = Disable
$CCBEN01(CR)
Codabar = Enable
Codabar Check Character Calculation
Enable this option to enables/disables calculation and verification of an optional Codabar check
character. When disabled, any check character in the label is treated as a data character
DEFAULT
$CCBCC00(CR)
Codabar Check Character Calculation = Don’t Calculate
$CCBCC01(CR)
Codabar Check Character Calculation = Enable AIM standard
check char.
$CCBCC02(CR)
Codabar Check Character Calculation = Enable Modulo 10
check char.