6
136
Universal Product Code-E (UPC-E)
Defaults
Scanner
Type
Code
Parameter
Description
I.D.#
Accept.
Input
Min
Max
Factory
Laser
2D Imager
Enter 1 for On and 0 for Off
Enable System
Digit 0
Enables/ disables UPC-E
labels with a system digit
of zero.
0508 On or Off Off On On √ √
Enable
Aggressive
Decoding
Enables more aggressive
decoding algorithms to be
used in order to scan hard
to read labels.
0509 On or Off Off On Off √ √
Send
Check Digit
Includes the check digit in
the label which is
transmitted.
050A On or Off Off On Off √ √
Send System
Digit
This instructs the decoder
to include the system digit
in the label transmission.
For UPC-E, the system
digit is zero.
050B On or Off Off On Off √ √
Convert
UPC-E to
UPC-A
Instructs the decoder to
expand UPC-E labels to
their UPC-A equivalents.
Any UPC-A parameters
will then apply to the
result.
050C On or Off Off On Off √ √
Read
Verification
Sets the number of times a
label must be read before
it is transmitted.
0522 01 - 04 01 02 01 √
User ID
Specifies the symbology
identifier (if any) that is
sent when parameter Send
Code ID (Index 0025) is
set to 3. ASCII code zero
(null) is used to indicate
that an identifier is not to
be sent for the symbology.
0523
Any
single
ASCII
character
(00 = Off)
‘E’ ‘E’ ‘E’ √ √
To Next Page
Loading...
Need help?
General
Weight and Dimensions
