Datalogic Applications
User’s Manual 119
10. (Optional) Select the barcode symbology in the Barcode Type
menu.
11. Click Save to save your barcode label set as a graphic image file.
12. Click Print Preview, then click the Print button in the button bar
and complete using your printer’s Print dialog box.
To apply the configuration by scanning the Scan2Deploy barcodes:
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap Menu, and then select the Scan2Pair command.
4. Scan any label in your Scan2Deploy label set.
5. Continue to scan all the barcodes on the list. Once the last label
is scanned, the configuration will be put into effect, and an
on-screen notification will confirm that your configuration is
complete.
6. Tap Home to exit.
NOTE
Some configurations are small enough to fit on only one
barcode label, and others may have many barcodes to
scan.
To Next Page
Loading...
