Settings
User’s Manual 73
Bluetooth® Manager Device Setup
To create a Bluetooth® pairing between your device and another
device that has Bluetooth® capabilities, ensure that the two devices
are turned on, discoverable, and within close range.
Enable Bluetooth®
To turn the Bluetooth® on:
1. Double-tap the Bluetooth Manager icon from the Control Panel
window:
2. Tap Settings. The Settings tab allows you to enable or disable
the Bluetooth® radio and specify settings for Incoming
Connections. Select Enable Bluetooth Radio.
NOTE
By default, Bluetooth® is turned off. If you turn it on, and
then turn off your device, Bluetooth® also turns off. When
you turn on your device again, Bluetooth® turns on
automatically.
To Next Page
Loading...
