Settings
74 Skorpio™ X4
3. If you’re going to connect a serial device (i.e. a scanner) to the
Skorpio X4, use the Port control to select a virtual COM port to
use for the connection.
4. Tap Find Me if you want to make the Skorpio X4 discoverable to
other Bluetooth® devices for 60 seconds, allowing them to set up
a connection. Tap OK on the Find Me pop-up window.
5. Tap Apply.
6. Once the Bluetooth® radio is enabled, the terminal automatically
starts searching for discoverable devices.
To Next Page
Loading...
Need help?
General