Datalogic Applications
130 Skorpio™ X4
Set a VNC Password
VNC is a standard protocol for remotely controlling PCs and other
computers, and it allows the use of a password to prevent unwanted
remote access to computers.
Set a VNC Password in DXU Agent
You can set a password for VNC in DXU Agent. This field allows VNC
communication to be authenticated, so prying eyes cannot remotely
connect to and control your device. This field is blank by default.
To set or edit a VNC password in DXU Agent:
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap Menu to display the menu.
4. Tap the Settings button.
5. Clear the Enable Service check box.
6. Tap the Password button in the VNC Settings section.
7. Type a password in the field. It can be numbers, letters, or some
punctuation characters.
8. Tap OK.
NOTE
The VNC password must match between the DXU console
and the DXU Agent on the device.
NOTE
You must clear "Enable Service" before you can change any
setting in DXU Agent.
To Next Page
Loading...
