Datalogic Applications
User’s Manual 159
GetSerialNumber Meta-tag
DL_GetSerialNumber – Obtains the device serial number and sends
it as an argument to a customer’s javascript function.
Content – name of function to pass serial number to.
Example:
<meta http-equiv="DL_GetSerialNumber" content=
"Javascript:CustomerFunction">
When a page with this metatag is loaded, the content should be a
javascript function that receives one parameter, the serial number.
An example would be function CustomerFunction(SerialNumber).
Reboot – Warm Boot Device Metatag
DL_Reboot – Warm boot device.
Content – "OnPageLoad" – Warm boot immediately upon page load.
Example:
<meta http-equiv="DL_Reboot" content=" OnPageLoad ">
Exit Metatag
DL_Exit – Exit the Locked Web Browser.
Content – "OnPageLoad" – Exit immediately upon page load. If "Exit
password" has been enabled in the Locked Web Browser options,
the Exit password will be required before exit.
Example:
<meta http-equiv="DL_ Exit " content=" OnPageLoad ">
To Next Page
Loading...
