Settings
User’s Manual 55
Imager Options
It allows to customize the 2D imager behavior. It is only available on
devices equipped with 2D decoding engines.
Enable illumination
If selected, it causes the scanner to turn on the illumination to aid
decoding.
Read from display
It improves capability to read barcodes from LCD screen (e.g.
displayed on smartphone display).
Enable picklist
If selected, it allows you to pick and decode a barcode from multiple
barcodes printed close together, when the scan illumination
intersects more than one barcode. Only the targeted barcode will be
returned.
Target mode
If enabled, when the scan button is pressed, the scanner will project
an aiming pattern to assist in centering over the barcode before
To Next Page
Loading...
Need help?
General