28 STS320
Does the internal lighting
system work correctly?
•If a trigger signal is active and no code is present
under the system, all readers must flash blue or
red. If this is not the case, please replace the reader
and send it to repair.
Do the readers read codes?
•Place a correctly positioned code under each reader.
If the reader has read the code, the GOOD read
(green) LED must light up. A green spot must also
light up on the code surface. If this is not the case,
please replace the reader and send it to repair.
Troubleshooting Guide for STS320 Solutions
Problem Suggestion
To Next Page
Loading...
