Datamax Label Printer User Manual

Maintenance
30 Ovation2
3.2 Fine Printhead Adjustment
A fine printhead adjustment set screw is located on top of the
printhead carrier assembly that can used for adjusting print quality.
This adjustment is set at the factory and should not need further
adjusting; however, with different types and thickness of media some
adjustment may be necessary.
To adjust the printhead, turn the set screw until optimum print quality
is obtained, (some trial and error may be necessary).
Figure 3-3 Fine Printhead Adjustment

Datamax Label Printer Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi, 300 dpi
Media Type	Labels, tags, receipts, or tickets
Media Thickness	0.0025 in (0.0635 mm) to 0.010 in (0.254 mm)
Connectivity	USB, Serial, Ethernet
Storage Temperature	140°F (-40°F to 60°C)
Power Requirements	100-240 VAC
Dimensions	Varies by model
Weight	Varies by model