Printing Labels
Ovation2 23
The commands used for bit mapped font loading are usually generated
by font-creation software. However, the assign font ID number
command must be sent to the printer before the font file. Font-loading
commands are listed in Table 2-6.
CC P PR Description
*c###D N N Assign Font ID Number
### = ID Number 100 to 999
)s#W Y N Font Descriptor
*c#E N N Character Code
# = ASCII Value of Character
(s#W Y N Character Download Data
# = Bytes of Bit-mapped Data
Table 2-6 Font-Loading Commands
CC = Command Character
P = Must Supply Parameters? (Y/N)
PR = printer Responds? (Y/N)
2.2 Programming Examples
<STX> L <CR>
H07 <CR>
D11 <CR>
19110080100002510K OHM 1/4 WATT <CR>
1a6210000000050590PCS <CR>
E
10K OHM 1/4 WATT
Figure 2-1 Sample Label
To Next Page
Loading...
