Datamax Label Printer

Printing Labels
22 Ovation2
CC Description Format
X Terminate label formatting mode
y Select font symbol set (optional scalable
fonts only)
y S xx
y = ASCII (0x79)
S = ASCII (0x54)
xx = symbol selection
z or
Z
Zero (0) conversion to "O"
eliminates slash (/)
+ Make last field entered increment numeric
+pii Make last entered field
incrementing
p = Zero fill character
ii = Data added to field
- Make last field entered decrement numeric
-pii Make last entered field
decrementing
p = Zero fill character
ii = Data subtracted from field
> Make last field entered increment
alphanumeric
>pii Make last entered field
incrementing 0 - Z
p = Zero fill character
ii = Data added to field
< Make last field entered decrement
alphanumeric
<pii Make last entered field
decrementing 0 - Z
p = Zero fill character
ii = Data subtracted from field
^ Set count by amount
^nn Set count by amount
nn = 2 digits
Skip # of labels before updating
count fields and time fields
Table 2-4 Label-Formatting Commands (concluded)
There are two special commands used by the printer, the STX S
(Recall Global Data) and the STX T (Print Date and Time)
commands. Unlike the other label-format commands, which follow the
STX L command, these special commands are entered directly into
the data field.
Character Description
<STX>S Recall global data and place in field
<STX>T Print time and date
Table 2-5 Special Label-Formatting Commands